You already have trackers. This is how you cover everything around them. AssetTag Edge is a slim, sealed Bluetooth 5.0 tag that pairs with the AssetTrack and AssetTrack Charge devices already in your yard, van or warehouse. Whenever a tracker is in range, the tag reports — so the pallets, bins, tools and racks around it show up on the same map without each one needing its own cellular device.
At 8.5 grams and 1.58 inches across, it goes on with a zip tie or a sticker in seconds and runs for up to 4 years on a replaceable CR2032 coin cell. It ships powered on and sealed to IP67, so deployment is genuinely just: attach, and it is tracked.
A cellular tracker on every single asset is the expensive way to get visibility. AssetTag Edge flips the maths: put your AssetTrack or AssetTrack Charge where it earns its keep, then tag everything within Bluetooth range of it. Each tag can be pinned to a fixed location — a bay, a rack, a bin — or attached to an asset so it moves with whatever tracker sees it.
Leverage the cellular trackers and gateways you have already paid for. Coverage scales with tags, not with subscriptions and radios on every single item.
A replaceable 220 mAh CR2032 draws an average 3.8 µA — years of service, and a battery you can buy anywhere when it finally runs down.
Waterproof and dustproof, rated −20 °C to +60 °C. It lives in yards, on trailers, in wash-down areas and inside containers.
Zip tie or sticker, 8.5 grams, 6 mm thick. No bracket, no drilling, no downtime — and the white shell keeps it discreet.
There is no switch and no setup step. The tag arrives broadcasting, so the whole deployment is: take it out of the box and attach it.
Paired with an AssetTrack using GPS and WiFi positioning, the tag gives you room-level visibility inside warehouses and buildings where satellites cannot reach.
Associate a tag with a bay, rack or bin and it anchors there on the map. Associate it with an asset and it rides along with whichever tracker sees it.
Get told when a tagged item stops appearing where it should — the earliest signal that something has walked off, while it is still findable.
| Device size | 1.58 × 1.11 × 0.23 in (40.2 × 28.2 × 6.0 mm) |
|---|---|
| Weight | 0.3 oz (8.5 g) including the battery |
| Enclosure | IP67 waterproof + dustproof · white |
| Radio | Bluetooth 5.0 · Nordic nRF52811 |
| Detection range | 150 feet outdoors · 75 feet indoors, from a BLE-enabled AssetTrack device |
| Battery | Replaceable 220 mAh CR2032 lithium coin cell |
| Battery life | Up to 4 years · 3.8 µA average current at default settings |
| Power on/off | Ships powered on — there is no off switch |
| Indicators | Single red LED |
| Mounting | Zip tie or sticker |
| Operating temperature | −20 °C to +60 °C (−4 °F to 140 °F) |
| Humidity | 0–95% non-condensing |
| Works with | BLE-enabled AssetTrack and AssetTrack Charge trackers, and GPX BLE gateways |
| Coverage | Wherever the paired tracker operates — currently the United States, Canada and Mexico |
| Certifications | FCC (USA) · CE, REACH, RoHS (Europe) |
Full specifications, radio detail, battery figures and environmental ratings — one sheet for your ops and compliance teams.
Download spec sheet →AssetTag Edge is the right answer when the things you want to see sit near a tracker you already own — a yard, a warehouse, a van, a container. If a tagged item needs to be found anywhere in the country with no GPX hardware nearby, or it needs its own cellular connection, a sibling device fits better. They all report into the same GPX platform.

Broadcasts to the Hubble Network's 100M+ phones and gateways instead of your own trackers — so it reports from places you have no hardware at all. Hardware included.
AssetTag Pro details →
The rugged cellular tracker AssetTag Edge pairs with — up to a decade on one battery, with WiFi positioning where GPS cannot see.
AssetTrack details →
Hardwired into a vehicle or forklift, it tracks the vehicle and reads nearby tags as it drives — so a normal shift becomes a rolling inventory count.
BLE RoadWired details →Range and dependency. AssetTag Pro broadcasts to the Hubble Network — 100M+ phones and connected devices — so it reports from places you own no hardware. AssetTag Edge reports through your own BLE-enabled AssetTrack devices and gateways, which makes it dramatically cheaper per asset for anything clustered near a tracker you already have: a yard, a warehouse, a van, a container.
Up to 4 years on a replaceable 220 mAh CR2032 lithium coin cell, drawing an average 3.8 µA at default settings. Actual life depends on how the tag is configured and how often it is detected. When it does run out, CR2032 cells are available anywhere.
The tag broadcasts continuously so it can be discovered at any moment. What you see on the map depends on how often a paired BLE-enabled AssetTrack device comes within range of it — in a busy warehouse that can be near-constant, and in a yard it is every time an equipped vehicle passes.
Zip tie or sticker, and that is the whole job. It weighs 8.5 grams, is 6 mm thick, and arrives already powered on — there is no switch and no setup step. The white shell keeps it unobtrusive on tools, bins and containers.
Yes, and indoors is where it earns its keep. Paired with an AssetTrack that uses both GPS and WiFi positioning, the tag gives room-level visibility inside warehouses and buildings where satellite signals do not reach. Expect roughly 75 feet of Bluetooth range indoors and 150 feet outdoors.
The tag itself just speaks Bluetooth, so its reach is whatever its paired tracker covers. Those BLE-enabled AssetTrack devices currently operate in the United States, Canada and Mexico.
Yes. It takes a standard 220 mAh CR2032 lithium coin cell, so a tag is a multi-year asset rather than something you throw away when the power runs out.
Yes — you can be alerted when tagged items stop appearing in the zones or near the gateways they should be. That is usually the first warning that something has left, while it is still close enough to find.
Tell us what keeps disappearing and we'll size the tags against the trackers you already run.