New Technology

BLE Asset Tracking.
No Gateways.
No Infrastructure.
No Limits.

BLE was always the right technology. It just needed the right network. GPX connects your assets to millions of devices already around them. No gateways to install, no infrastructure to manage.

$45/yr
Per device
5 yr
Battery life
$0
Infrastructure cost
Asset Tag
Last seen: 2m ago

Not all BLE tracking is the same.

Legacy BLE systems rely on an expensive mesh of hardwired readers. We pioneer gateway-less BLE asset tracking by leveraging an existing terrestrial network, giving you seamless indoor-to-outdoor visibility with zero IT deployment.

The old way

  • ×
    Proprietary gateways at every facility
  • ×
    $100K+ per site in hardware and installation
  • ×
    IT project to install and maintain
  • ×
    No visibility once assets leave infrastructure
  • ×
    Months to deploy

BLE, everywhere

  • No gateways. The network already exists.
  • $0 infrastructure cost
  • Stick the tag, start tracking
  • Works indoors, outdoors, in transit
  • Online instantly

Always on. Always connected. Seamless Indoor to Outdoor Tracking.

Your tag passively broadcasts a signal. Nearby devices on the terrestrial network pick it up and relay the location to the GPX platform in seconds.

Always broadcasting

GPS must choose between frequent reporting and long battery life. BLE tags emit passively, 24/7/365. Always locatable, 5-year battery.

Millions of relays, already deployed

Smartphones and connected devices pick up the tag and relay location to GPX. Denser environments mean more frequent updates.

GPX turns data into action

Location data flows into geofences, dwell analytics, and anomaly detection. Get alerted before something goes missing, not after.

Where it works

Millions of connected devices, already in the field.

Hubble Coverage Map
Urban / Suburban
Frequent updates in high-traffic areas. The denser the environment, the more data you get.
In Transit
Assets report along highways and corridors as they pass connected devices on the road.
Rural
Less frequent updates, but still adequate for asset tracking. Know where it is, even in low-density areas.
International
European coverage available and expanding. Assets in transit report 6-8 times per day.

Legacy Active RFID & BLE vs. Gateway-less BLE Cost Comparison

For a 100,000 sq ft facility tracking 500 assets. Gateway BLE requires massive upfront investment. GPX does not.

Old BLE GPX AssetTag GPS Tracker
Gateway hardware $12K - $50K $0 $0
Installation & cabling $37K - $112K $0 $0
Tags / Devices $5K - $12.5K Free $25K - $75K
Software (annual) $15K - $50K/yr $22,500/yr $48,000/yr
Year 1 Total $69K - $225K $22,500 $73K - $123K
3-Year Total $109K - $345K $67,500 $169K - $219K

Installation is 50%+ of total cost for traditional wired BLE systems. GPX eliminates it entirely.

The right solution for how your assets actually move.

GPS tracking works. But for many of the highest-volume use cases, the asset tag delivers the same visibility more effectively, at a fraction of the cost.

📦

Returnable Transport Packaging (RTP): Pallets, totes, racks, and bins

Eliminate supply chain blind spots, track dwell time, prevent asset hoarding, and close the loop on every container to achieve massive ROI using AI-powered analytics.

Avg. 18x ROI on container tracking
🏭

High-Traffic Environments

Warehouses, distribution centers, hospitals, urban yards, and facilities with heavy foot traffic. In these environments, asset tags report as frequently as GPS with no gateways, no scanners, and no infrastructure to install.

Up to 100K+ reports/day in urban facilities
🏗️

Construction & Equipment

Generators, scaffolding, power tools, trailers, and equipment that moves between active job sites. At $45/year with free hardware, you can tag every asset on the site and know when something leaves that shouldn't.

$35B+ in cargo theft annually in the U.S.
🏥

Medical Equipment

Track devices across facilities, in the field, and even inside patient homes. Demo units with sales reps, loaner equipment like respirators, wheelchairs that walk off. The terrestrial network works where GPS and cellular struggle: inside hospitals, between floors, in dense facilities.

Tracks inside hospitals, between floors, in patient homes

Free hardware. Flat-rate tracking.

We provide the devices at no cost. You pay a simple annual subscription. No hidden fees, no per-ping charges, no infrastructure.

GPS Tracker
$96/yr
per device, billed annually
  • Predictable reporting intervals
  • Strong rural & remote coverage
  • Full GPX platform access
  • Geofencing, alerts, and dwell analytics
  • Scout AI included
  • Best for high-value & remote assets
Get Started

What our customers say

★★★★★

"GPX's GPS data and AI platform transformed visibility across our supply chain. We now track returnable containers in real time, cut losses and shortages, and manage assets with greater confidence and control."

Bryan T.
Executive, General Motors
★★★★★

"We have had over a 95% recovery rate since implementing GPX solutions. It has saved us so much time and money tracking and protecting our fleet."

Benny F.
Executive Director, Heartland Bikeshare
★★★★★

"An account swore the demo unit wasn't there — until GPX showed the location. One screenshot later, it 'reappeared.' These trackers remove doubt and protect assets."

Cathrine B.
Pride Mobility

Your Questions About Gateway-Less BLE Tracking Answered

Frequently asked questions about infrastructure-free BLE asset tracking.

Gateway-less BLE tracking is an advanced IoT solution that pinpoints the location of Bluetooth Low Energy tags without requiring the installation of expensive hardware gateways, routers, or scanners. Instead, GPX leverages an existing, widespread terrestrial network of connected devices to securely relay precise location data directly to your dashboard.
BLE tags passively broadcast a secure Bluetooth signal that is anonymously picked up by millions of nearby smartphones and connected devices. These everyday devices securely relay the tag's location to the cloud in real-time, completely bypassing the need for your internal IT team to install and maintain fixed facility infrastructure.
BLE is ideal for tracking a high volume of assets—such as tools, pallets, or medical equipment—because the tags are highly cost-effective, have multi-year battery lives, and work flawlessly indoors. GPS is better suited for remote, powered, or rural assets where population density is lower. GPX offers both solutions depending on the asset's specific environment.
Yes. While traditional BLE stops at the warehouse door, modern terrestrial network tracking allows BLE tags to be monitored seamlessly anywhere. The GPX terrestrial network tracks assets from inside a facility directly to the outdoor yard, and even in transit on highways, by continuously pinging off surrounding connected devices.
Traditional gateway-based BLE systems can cost hundreds of thousands of dollars in hardware, cabling, and IT installation. Next-generation gateway-less solutions eliminate these infrastructure costs entirely. Businesses simply pay a flat, predictable annual software subscription per device, making massive deployments highly affordable.

Stop losing what matters.

Get started with a pilot. We'll ship you tags, set up your account, and show you what you've been missing. No commitment. No infrastructure. Just visibility.

Get Pricing