GPS asset tracking solutions: real-time visibility, security, and optimization.

Stop searching for what you already own. GPX puts GPS and Bluetooth (BLE) asset tracking on everything your operation runs on — equipment, tools, vehicles, containers, and inventory. One platform, a full range of asset tracking devices, and live location for all of it.

Live within days · no gateways, readers, or scanners to install
18×average ROI on asset tracking
<8 hrtypical theft recovery
5 yrsbattery, zero maintenance
100%of the pool tracked, not sampled
GPS asset tracking — real-time visibility of equipment, containers, and vehicles in the field
GPS asset tracking — live view of every asset
Trusted by the operators who can't afford to lose.
General Motors
Stellantis
Airbus
Northrop Grumman
SpaceX
Rivian
Pfizer
Blue Origin
Costco Wholesale
Budget
MLS
Caterpillar
Toyota
BMW
Komatsu
STIHL
Real-time asset tracking

Tracking used to be too expensive to put on everything. Not anymore.

For decades, the math of GPS asset tracking forced a compromise: track your most expensive assets, audit the rest, and quietly re-buy whatever walked off. Equipment scattered across job sites, totes hoarded at partner docks, tools that vanished between crews — the losses weren't visible until the annual count, and by then they were write-offs.

GPX flips that math. With low per-asset pricing — AssetTag Pro hardware included — a five-year battery, and a terrestrial network of over 100 million gateways that already exists — nothing to install, no readers, no scanners — the entire pool is finally worth tagging. Not a sample. Everything.

18×Average return on asset tracking across GPX deployments — from eliminated replacement purchases, recovered theft, and idle equipment put back to work.

The result is a live, continuous answer to the three questions every operation asks: Where is it? Is it safe? Is it working? That's real-time visibility, security, and optimization — and it's the rest of this page.

Asset tracking devices

One platform. A tracker for every asset.

A hand tool and a haul truck don't need the same hardware. GPX pairs the right GPS asset tracker or BLE device to each asset class — and every one reports into the same live map, alerts, and analytics.

What are you tracking?
Recommended GPX asset tracking device
AssetTag Pro

Battery-powered GPS + BLE tag

Five-year battery, smaller than a credit card, reports over a 100M-gateway network with nothing to install.

AssetTag Pro

Battery GPS + BLE tag

The workhorse of the range: a rugged tag smaller than a credit card that reports for five years without charging, wiring, or maintenance — over a 100M-gateway terrestrial network that already exists, indoors and out, across borders. The tracker that finally makes it worth tagging everything, from returnable containers to hand tools.

AssetTag Pro GPS and BLE asset tracker front view, shown at scale
AssetTag Pro2.8 × 1.8 × 0.8 in · 1.2 oz
Credit card3.4 × 2.1 in — shown to scale
Best for
Containers & racksTools & attachmentsPallets & totesMobile equipment

BLE RoadWired

Hardwired GPS + BLE gateway

Hardwired to the vehicle for constant power — live location every 30 seconds on the move, ignition status, and trip history. And it doubles as a mobile BLE gateway, reading nearby GPX BLE tags (AssetTag Edge, AssetTemp) as it drives — so forklifts and trucks update tagged assets automatically. The standard for fleet tracking, dealer lots, and financed vehicles.

Best for
Fleet vehiclesDealer inventoryFinanced vehicles

Heavy-equipment GPS

Rugged · engine-hour data

Purpose-built for yellow iron — engine hours and utilization alongside location, in enclosures that shrug off vibration, weather, and wash-downs. See heavy equipment tracking for the full story.

Best for
Excavators & loadersAg implementsTrailers

Smart Label — disposable GPS tracker

One-time use · peel, stick & go

A low-cost, single-use tracker that rides along with the shipment — peel, stick, and go. Live location door to door, nothing to install, nothing to recover, and cheap enough to put on everything. The right tool for shipment tracking.

Best for
High-value shipmentsPallets & parcelsOne-way freight

BLE beacons

Bluetooth asset tracking at scale

Zone-level presence indoors — bins, small tools, and inventory by the thousand, with no infrastructure to build: tags report through GPX gateways and BLE RoadWired-equipped vehicles moving through your operation. See warehouse tracking and inventory tracking.

Best for
Indoor zonesSmall toolsInventory
Security & theft recovery

Theft alerts in real time. Recoveries as a process, not a search.

Every tracked asset reports continuously, so the moment something moves that shouldn't, you know. Scout AI geofences every site in seconds — plants, yards, job sites, lots — and unauthorized movement fires an instant alert to the right person, by text, email, or webhook.

When something does walk off, full movement history turns recovery into a procedure: an auditable trail from dispatch to the asset's current location, evidence law enforcement can act on, and a platform-wide track record of getting things back fast.

<8 hrsPlatform-wide, stolen assets typically come home in under 8 hours — geofence alert, movement history, law-enforcement handoff.
Geofences in secondsScout AI fences every site automatically — no drawing polygons by hand.
Instant movement alertsAfter-hours or out-of-zone movement reaches your team while response is easy.
Full movement historyAn auditable trail from dispatch to recovery — evidence law enforcement can act on.
Deterrence that compoundsMarked, tracked fleets get targeted less — and insurers notice.
GPX asset tracking software — geofences on a live map with site list, place types, and border-crossing zones
Geofences in GPX — every site fenced, every entry and exit logged the moment it happens
Utilization & operations

Asset tracking software that puts idle assets back to work.

Theft is the loss you notice. Idle assets are the loss you don't. Real-time asset tracking shows 100% of the pool — tracked, not sampled — so under-used equipment, hoarded containers, and slow-turning inventory show up as data instead of write-offs.

Dwell-time analytics answer the questions that used to take a site visit: which supplier is sitting on your racks, which excavator hasn't turned a track in two weeks, which bins never came home last season. And because it all flows through API and webhooks into your ERP, WMS, and TMS, the answers land in the systems your team already works in.

Idle-asset detectionSee which machines sat all week — redeploy instead of rent or re-buy.
Dwell-time analyticsKnow exactly where assets sit and for how long — and who's hoarding them.
Condition monitoringTemperature and humidity sensing (AssetTemp) for assets where condition is the point.
ERP, WMS & TMS integrationLive locations, cycle counts, and alerts in your systems via API and webhooks.
GPX asset tracking software — every tracked asset on one live map with battery status, last report, and geofence state
Every asset on one live map — battery, last report, and geofence status at a glance
The platform underneath

One asset tracking system for every device you deploy

Tags, wired trackers, beacons, and sensors all report into the same map, the same alerts, and the same analytics — wherever your assets move.

Geofencing & theft alerts — Scout AI geofences every site in seconds. Unauthorized movement triggers an instant alert.
Dwell-time analytics — see which supplier is hoarding racks, which excavator sat idle, which bins never came home.
Scout AI — ask in plain language: "Which assets haven't moved in 30 days?" Scout learns your operation and flags anomalies before they become losses.
ERP, WMS & TMS integration — live locations, cycle counts, and alerts in the systems that run your business.
GPX terrestrial network coverage map for GPS and BLE asset tracking across North America
Terrestrial network coverage — 100M gateways, wherever your assets move
In their words

Proof from the yard, the plant, and the road.

GPX's GPS data and AI platform transformed visibility across our supply chain. We track returnable containers in real time, cut losses and shortages, and manage assets with far more confidence.
BT
Bryan T.
Executive, General Motors
We tagged everything — machines, attachments, even the light towers. The first month, dwell reports surfaced more idle iron than we thought we owned. We cancelled two rentals that week.
RM
Rob M.
Operations Manager, Caterpillar
A trailer left the lot at 2 a.m. on a Saturday. The alert beat the security-camera footage. It was back on the lot before Monday's first reservation.
SL
Sandra L.
Fleet & Asset Manager, Budget
Questions & answers

Asset tracking, answered.

How does GPS asset tracking work?

A tracking device — a battery-powered tag like AssetTag Pro, a wired GPS vehicle tracker, or a BLE beacon — rides on each asset and reports its location continuously. AssetTag Pro reaches the platform over a terrestrial network of more than 100 million gateways formed by connected devices already in the field, so there are no gateways, readers, or scanners to install. Locations flow into the GPX platform in real time, where geofencing, alerts, and analytics turn them into action.

What is asset tracking software?

Asset tracking software is the platform that turns raw device locations into a live operational picture: a real-time map of every asset, geofences around your sites, dwell-time and utilization analytics, movement history, and automated alerts. GPX adds Scout AI — ask questions in plain language and get answers about your fleet — plus API and webhook integration so the same data feeds your ERP, WMS, and TMS.

Why should businesses track their assets?

Three reasons: loss, theft, and utilization. Untracked assets quietly disappear — hoarded at partner sites, lost in yards, or stolen — and get re-bought. Tracked assets come home: GPX recoveries typically complete in under 8 hours. And visibility pays beyond security: idle-asset detection and dwell analytics put existing equipment back to work instead of renting or buying more. Across deployments, GPX customers average an 18× return on their tracking investment.

What types of assets can be tracked?

Practically anything your operation owns: heavy equipment, tools and attachments, vehicles and trailers, returnable containers, racks, pallets, totes, inventory, and in-transit shipments. Because GPX offers a full device range — battery GPS+BLE tags, wired vehicle trackers, heavy-equipment GPS, disposable sensor trackers, and BLE beacons — the hardware matches the asset instead of forcing one tag to fit all.

What is the difference between GPS and BLE asset tracking?

GPS asset trackers determine their own position from satellites and work anywhere outdoors — ideal for vehicles, equipment, and freight in transit. Bluetooth (BLE) asset tracking uses short-range beacons detected by nearby receivers, which makes it extremely low-cost and effective indoors, where GPS signals struggle. GPX combines both in one platform — and in one device with AssetTag Pro — so assets stay visible from the warehouse floor to the open road.

How much does an asset tracking system cost?

Low per-asset pricing at fleet volume, with AssetTag Pro hardware included. The subscription covers the full GPX platform — geofencing, alerts, dwell analytics, and Scout AI — with no per-ping charges and no infrastructure to buy. Assets that need more, like financed vehicles or heavy equipment with engine data, use dedicated GPS trackers quoted per deployment. Most customers find tracking the whole fleet costs less than the losses they were absorbing.

Every asset on the map. Every alert in seconds. Every recovery routine.

Start with a pilot: we ship you trackers, you put them on assets, and within days you're watching your whole operation live. No infrastructure. No commitment.

18× average ROI · recoveries in under 8 hours · live within days, not quarters
Get Pricing
Get Pricing